Tips From the Moving Company Pros: The Best Ways To Move a Pinball Machine



With pinball making a substantial resurgence throughout the country, Gentle Giant wishes to make sure that these timeless, beautiful devices remain damage-free while being transported. Oh, and we desire the people moving them to be safe, too.

In the beginning look, pinball machines can appear daunting to move due to the fact that of their weight, fragility, and size. The good news is, our experienced Giants have a couple of tricks up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox

Most of modern pinballs (made in the last Twenty Years or so) have a hinge system which enables the headbox to be folded down. Early pinball makers had their headboxes bolted on, using either two or 4 bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State machines.

Later devices have hinges and utilize a latching system to keep the headbox upright. There might likewise be two bolts inside as added security, in case the latch is broken or unintentionally un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball makers, you have to remove the headbox rear gain access to panel to access to the bolts and plugs inside. Normally this panel has a lock on it to keep it in location, but gradually the secret may have been lost. Frequently, there is a screw keeping this panel in location.

Once inside, get rid of the bolts and disconnect the large ports that have circuitry going down into the machine. You might desire to label these ports to put them back in the best area, but they ought to be various sizes, making it hard to plug back incorrectly.

You can now eliminate the headbox entirely, or fold the headbox down onto the playfield glass. Make certain you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in location.
Early Solid State Pinballs

For early Solid State Pinballs, you will require to get rid of the back glass. There is a lock located on the headbox in one of 3 areas: the left-hand side at the top, right-hand side at the top or on top of the headbox in the center.

Once opened, get rid of the back glass by raising it up using the lift channel (at the bottom of the glass), and after that pull it out from the bottom.

Then, open the back box light panel by lifting the latch located on either the left-hand side or right-hand side. The panel can now swing out towards you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to lift up the lamp panel in order to swing it open.

Now that you are inside, you can eliminate the bolts, and any plugs that have wires decreasing into the maker. You may wish to identify these plugs to put them back in the ideal area. You may not have to eliminate the plugs, as the circuitry needs to be long enough to allow the headbox to be folded down.

At this point, you can lock up the light panel and change the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the provided secret, turn the lock 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the machine. This is an easy setup and needs no tools.

You're done if you can now fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also assist keep the back glass in location.

If you can not fold the head box down, then you have to get in. There is a lock situated at the top of the back glass in the center. Utilize the provided key to unlock, and remove the back glass by lifting it up from the bottom, and after that pulling it out from the bottom.

Next, you will require to get rid of the display panel. You can do this by lifting it up and out. Open the lamp panel. There will be a lock situated on either the left-hand or right-hand side. (Some more recent Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

Eliminate the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Removing the Legs.

Pinball Maker legs are held in location by 8 bolts. The modern pinballs have captive nuts or threaded plates inside for the bolts to screw into.

But these captive nuts and threaded plates can be damaged, and making use of extra nuts may have been needed. If this holds true, you will have to open the front door of the pinball, slide out the playfield glass, and raise up the playfield.

With the front door (coin door) open, move the lock down bar latch across and remove the lock down bar. Then slide out the playfield glass, and put in a safe place. Next, raise the playfield by putting your hand where the ball drains, and lift the playfield up.

You ought to now have access to any nuts that may have been utilized. When any nuts have actually been eliminated, change the playfield glass and lock down bar, and lock the front door.

Make sure to mark or keep in mind which legs are for the front and back, as they will be changed in a different way to match.
Filling the Pinball.

You are now all set to carry your pinball maker. Prior to you fill it, make certain you check here get rid of the pinballs so they do not bounce around throughout transportation.

It might be much easier to get rid of the legs simply prior to filling the maker if you are moving the pinball utilizing a van or SUV. Get a good friend to assist and have among you supporting the pinball, while the other eliminates the front legs. Move the device in, and after that eliminate the back legs. It is much simpler to pack the device front first.

Make certain you strap the pinball in, as you do not desire it moving if you need to stop unexpectedly!

For Electro-Mechanical pinball devices, you require to eliminate the headbox rear access panel to acquire more info access to the bolts and plugs inside. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

If you are moving Source the pinball using a van or SUV, it might be much easier to get rid of the legs simply prior to packing the device. Grab a buddy to have and help one of you supporting the pinball, while the other removes the front legs.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Tips From the Moving Company Pros: The Best Ways To Move a Pinball Machine”

Leave a Reply

Gravatar